Removal

AUDIO / VISUAL: NETWORK GATEWAY ECU: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH Removal

3. REMOVE CONSOLE UPPER PANEL ASSEMBLY Removal

4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

5. REMOVE FRONT DOOR SCUFF PLATE RH Removal

6. REMOVE FRONT DOOR OPENING TRIM COVER RH Removal

7. REMOVE INSTRUMENT SIDE PANEL RH Removal

8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

9. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal

10. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY Removal

11. REMOVE NETWORK GATEWAY ECU





(a) Disconnect the connector.

(b) Detach the 2 claws and remove the cover.

(c) Remove the ECU.