Removal

2GR-FSE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE ACCELERATOR PEDAL





(a) Disconnect the accelerator pedal position sensor connector.

(b) Remove the 2 bolts and accelerator pedal.

NOTICE:
* Avoid physical shock to the accelerator pedal.
* Do not disassemble the accelerator pedal assembly.