Installation

EXTERIOR: REAR SPOILER: INSTALLATION

HINT
* When installing the spoiler, heat the vehicle body and spoiler using a heat light.
* A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

Heating temperature:





NOTICE:
Do not heat the body and spoiler excessively.

1. INSTALL REAR SPOILER SUB-ASSEMBLY

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) If reusing the spoiler:

Clean the spoiler.

(1) Using a heat light, heat the spoiler.

(2) Remove the double-sided tape from the spoiler.

(3) Wipe off any tape adhesive residue with cleaner.

(4) Apply new double-sided tape to the spoiler.

(c) Install the spoiler.

(1) Using a heat light, heat the vehicle body and spoiler.

(2) Remove the peeling paper from the face of the spoiler.

HINT
After removing the peeling paper, keep the exposed adhesive free from foreign matter.

(3) Install the spoiler with the 4 nuts and clip.





2. INSTALL LUGGAGE COMPARTMENT DOOR COVER

3. INSTALL DOOR INSIDE HANDLE BEZEL

4. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP