Removal

SUPPLEMENTAL RESTRAINT SYSTEM: REAR SEAT SIDE AIRBAG ASSEMBLY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

2. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

3. REMOVE REAR SEAT LH AND RH HEADREST ASSEMBLY

4. REMOVE REAR SEATBACK ASSEMBLY Removal

5. REMOVE REAR DOOR SCUFF PLATE Removal

6. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY

(a) Disconnect the connector.

NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Remove the 2 bolts.