Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE ROOF HEADLINING ASSEMBLY

HINT
Refer to the instructions for Removal of the roof headlining assembly Removal.

3. REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY

(a) Disengage the wire harness clamp from the tire pressure warning receiver assembly.





Text in Illustration





(b) Remove the 2 nuts.

(c) Disengage the guide from the hole to remove the tire pressure warning receiver assembly.

(d) Disconnect the connector from the tire pressure warning receiver assembly.