Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT SEAT SIDE AIRBAG ASSEMBLY: INSTALLATION

1. INSTALL FRONT SEAT SIDE AIRBAG ASSEMBLY

CAUTION:
* The nuts must not be reused.
* Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.
(a) Install the front seat side airbag assembly with 2 new nuts.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Engage the 2 clamps.

2. INSTALL FRONT SEPARATE TYPE SEATBACK COVER WITH PAD Reassembly

3. INSTALL FRONT SEAT HEADREST SUPPORT Reassembly

4. INSTALL FRONT SEAT HEADREST SUPPORT

5. INSTALL FRONT SEATBACK BOARD COVER SUB-ASSEMBLY Reassembly

6. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY Reassembly

7. INSTALL AIRBAG WIRE HARNESS

(a) Engage the 2 clamps.

(b) Connect the connector.

(c) Engage the claw and 3 clamps to install the airbag wire harness.

(d) Install the 2 wire harness clamps.

8. INSTALL FRONT SEAT ASSEMBLY

Installation