Removal

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY: REMOVAL

1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
Wait for 90 seconds after disconnecting the cable to prevent the airbag deployment.

3. REMOVE FRONT DOOR SCUFF PLATE RH Removal

4. REMOVE FRONT DOOR OPENING TRIM COVER RH Removal

5. REMOVE SIDE INSTRUMENT PANEL RH Removal

6. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

7. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

8. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

(a) Remove the 3 bolts.





(b) Disconnect the front passenger side knee airbag connector.

(c) Disengage the 2 claws and 2 pins, and remove the front passenger side knee airbag assembly.





NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.