Removal

NAVIGATION: MULTI-DISPLAY: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

Navigation System (for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Navigation System for HDD)

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

3. EJECT MAP DISC (w/ Navigation System for DVD) Removal

4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

5. REMOVE UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE Removal

6. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal

7. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

8. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

9. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY Removal

10. REMOVE HARD DISK DRIVE Removal

11. REMOVE NO. 1 RADIO BRACKET Removal

12. REMOVE NO. 2 RADIO BRACKET Removal

13. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY

(a) Disengage the 2 claws and 4 clips.





(b) Remove the display and navigation module display.