Washer Nozzle (For Front Side)

WIPER / WASHER: WASHER NOZZLE (for Front Side): ADJUSTMENT

PRECAUTION OF WASHER NOZZLE ADJUSTMENT

(a) Do not clean or adjust the washer nozzle with a safety pin, etc. because:

(1) The washer nozzle tip is made of resin and could be damaged.

(2) Adjustment is not necessary for this spray type washer nozzle (for Front Side). If it is necessary to change the nozzle angle, replace the washer nozzle (for Front Side) with one that has a different nozzle angle.

(b) If the washer nozzle is clogged with wax, etc., remove it and clean the nozzle hole with a soft resin brush or other cleaning tool.


1. REMOVE WASHER NOZZLE SUB-ASSEMBLY Removal

2. ADJUST WASHER NOZZLE SUB-ASSEMBLY

(a) Select a washer nozzle so that the contact area is within the standard. Replace the washer nozzle with the selected one.





3. INSTALL WASHER NOZZLE SUB-ASSEMBLY Installation