Removal

2ZR-FXE COOLING: THERMOSTAT: REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER

2. REMOVE RADIATOR SUPPORT OPENING COVER Removal

3. REMOVE INLET AIR CLEANER ASSEMBLY Removal

4. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE Removal

5. DRAIN COOLANT (for Engine) Service and Repair

6. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

(a) Disconnect the No. 2 radiator hose and No. 3 water by-pass hose.

Text in Illustration

NOTICE:
* Do not apply force to the water inlet with thermostat sub-assembly when disconnecting the No. 3 water by-pass hose.
* Do not damage the water inlet with thermostat sub-assembly.

HINT
When disconnecting the No. 3 water by-pass hose, pinch the hose clamp, rotate the hose and pull it straight off the pipe.

(b) Remove the 2 nuts, bolt and water inlet with thermostat sub-assembly.