Removal

EXTERIOR PANELS / TRIM: REAR BUMPER: REMOVAL

1. REMOVE REAR BUMPER PIECE

(a) Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws.





Text in Illustration





(b) Disengage the hook and remove the rear bumper piece.

HINT
Use the same procedure for the RH side and LH side.

2. REMOVE REAR BUMPER ASSEMBLY

(a) Put protective tape around the rear bumper assembly.





Text in Illustration





(b) Using a clip remover, remove the 8 clips.





(c) Remove the 2 screws.

(d) Remove the screw.





HINT
Use the same procedure for the RH side and LH side.

(e) Disengage the 3 claws as shown in the illustration.





HINT
Use the same procedure for the RH side and LH side.

(f) Disengage the 4 claws as shown in the illustration.





(g) w/ Intuitive Parking Assist System:

(1) Disconnect the connector.

(h) Remove the rear bumper assembly.