Smart Access System With Push-Button Start (For Entry Function)

THEFT DETERRENT / KEYLESS ENTRY: SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Entry Function): CUSTOMIZE PARAMETERS

1. CUSTOMIZE SMART ACCESS SYSTEM WITH PUSH-BUTTON START SYSTEM (for Entry Function)

HINT
The following items can be customized.

NOTICE:
* When the customer requests a change in a function, first make sure that the function can be customized.
* Record the current settings before customizing.

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the power switch on (IG).

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Wireless Door Lock, Smart key/Access or Warning.

(5) Select the setting by referring to the table below.





(b) Customizing with the multi-display (w/ Navigation System (for HDD))

(1) Turn the power switch on (IG).

(2) Enter the following menus: Setup / Vehicle / Vehicle Customization / Door Lock Setting.

(3) Select the setting by referring to the table below.





(c) Customizing with the Combination meter assembly (w/o Navigation System (for HDD))

HINT
* Press and hold the DISP switch (steering pad switch assembly) when entering an item.
* Briefly press the DISP switch (steering pad switch assembly) when selecting an item.

(1) Turn the power switch on (IG).

(2) Enter the following menus: Settings / Vehicle Settings

(3) Select the setting by referring to the table below.





(4) Press and hold the DISP (steering pad switch assembly).

(5) The setting completion screen will be displayed.

(6) Return to the item selection screen.

(d) Entry unlock mode switching function (manual operation)

NOTICE:
Because the key (for card type) does not have a wireless transmitter function, it cannot be used to change the entry unlock mode.

(1) The following entry unlock modes can be selected when using the entry unlock mode switching function.

* All door unlock mode: When the sensor of a front door outside handle assembly is touched, an entry unlock operation is performed simultaneously for all doors.

* Driver door unlock mode: When the sensor of the front door outside handle assembly is touched, an entry unlock operation is performed for the driver door only. If any other door handle is touched, an entry unlock operation is performed simultaneously for all doors.

(2) When customizing through manual operation:

1 Turn the power switch off.

2 Check that the LED of the key is not illuminated, and then press and hold the lock and unlock buttons of the key for 5 seconds or more while the key is in the actuation area.

3 Check the current setting.

HINT
* The mode changes from all door unlock mode to driver door unlock mode and then back to all door unlock mode.
* The answer-back (wireless buzzer, buzzer in the combination meter assembly) performed for each mode is indicated in the table below.






4 Release the lock and unlock buttons of the key.

5 Check that the LED of the key is not illuminated, and then press and hold the lock and unlock buttons of the key for 5 seconds or more to change the mode.

HINT
Repeat the procedure as necessary to select the desired mode.

6 Unlock the doors with the wireless operation, and then open any door





(e) Entry cancel function (manual operation)

NOTICE:
Because the key (for card type) does not have a wireless transmitter function, it cannot be used to change the entry unlock mode.

HINT
While the smart access system with push-button start is canceled, it is possible to lock and unlock the doors with the wireless operation, and the start system can be operated by holding the key against the power switch.

(1) The following functions are disabled when the smart access system with push-button start is canceled.

1 Entry unlock/lock functions

2 Push start function

3 Key lock-in prevention function

4 Entry warning functions

(2) When canceling the system through manual operation:

1 Make sure the following conditions are met:

* The power switch is off.

* The driver door is closed.

* The driver door is unlocked.

2 Press the unlock button of the key.

3 Open the driver door within 5 seconds of completing the step above (driver door: closed at beginning of step -> opened).

4 With the driver door open, press the unlock button of the key 2 times within 5 seconds of completing the step above.

NOTICE:
If the driver door is closed before or while pressing the unlock button, the entry cancel setting mode will end.

5 Close and open the driver door twice within 30 seconds of completing the above step (driver door: open at beginning of step -> closed -> opened -> closed -> opened).

6 With the driver door open, press the unlock button of the key 2 times within 30 seconds of completing the step above.

NOTICE:
If the driver door is closed before or while pressing the unlock button, the entry cancel setting mode will end.

7 Close and open the driver door within 30 seconds of completing the step above (driver door: open at beginning of step -> closed -> opened).

8 Close the driver door within 5 seconds of completing the above step.

9 Check that the wireless buzzer sounds twice (short beeps) to confirm that the smart access system with push-button start has been canceled.

(3) Perform the following procedure to restore the smart access system with push-button start to the active state from the canceled state.

1 Perform the procedures to cancel the smart access system with push-button start again.

2 Check that the wireless buzzer sounds once (short beep) to confirm that the smart access system with push-button start has been restored to the active state.

HINT
* The system changes between the canceled state and the active state each time the procedure to cancel the system through manual operation is performed.
* The buzzer sounds twice when the system changes from the active state to the canceled state, and sounds once when the system changes from the canceled state to the active state.