Removal

SUSPENSION: REAR NO. 2 SUSPENSION ARM: REMOVAL

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.
1. REMOVE WHEEL HUB ORNAMENT SUB-ASSEMBLY

(a) Remove the 10 bolts and ornament.

2. REMOVE REAR WHEEL

(a) Remove the 5 nuts and wheel.

3. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY LH





(a) Remove the bolt and nut, and disconnect the stabilizer link and the height control link from the rear No. 2 suspension arm.





(b) Remove the bolt and nut, and disconnect the shock absorber from the rear No. 2 suspension arm.





(c) Place matchmarks on the adjusting cam and rear No. 2 suspension arm.

(d) Remove the nut, camber adjusting cam No. 2 and camber adjusting cam No. 1. Then disconnect the rear No. 2 suspension arm from the axle carrier.





(e) Remove the bolt, nut, washer and rear No. 2 suspension arm.