Removal

3UZ-FE ENGINE CONTROL SYSTEM: THROTTLE BODY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. DRAIN ENGINE COOLANT Service and Repair

3. REMOVE V-BANK COVER





(a) Remove the 2 nuts.

(b) Remove the 2 clips and cover.

4. REMOVE NO. 1 AIR CLEANER INLET

(a) Remove the bolt and air cleaner inlet.

5. REMOVE INTAKE AIR CONNECTOR PIPE





(a) Disconnect the air hose and No. 1 ventilation hose.

(b) Loosen the 2 hose clamps and bolt, and remove the intake air connector.





6. REMOVE THROTTLE BODY

(a) Disconnect the connector.

(b) Disconnect the ventilation hose.

(c) Disconnect the 2 water by-pass hoses.

(d) Remove the 2 bolts, 2 nuts, throttle body and gasket.