Removal

PARKING BRAKE: PARKING BRAKE PEDAL: REMOVAL

1. FOLLOW PRECAUTION

(a) Follow the precaution Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

3. REMOVE DOOR SCUFF PLATE ASSEMBLY LH Removal

4. REMOVE FRONT DOOR OPENING TRIM COVER LH Removal

5. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Removal

6. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIR BAG ASSEMBLY Removal

7. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY

(a) Disconnect the parking brake switch connector.

(b) Remove the 2 bolts, and then disconnect the parking brake release cable.

(c) Remove the lock nut and adjusting nut.





(d) Remove the clip.

(e) Remove the bolt and 2 nuts, pull out the No. 1 parking brake cable and then remove the control pedal.





8. REMOVE PARKING BRAKE RELEASE CABLE SUB-ASSEMBLY