On-Vehicle Inspection

SEAT: SEAT HEATER SYSTEM: ON-VEHICLE INSPECTION

1. INSPECT SEAT HEATER CONTROL SUB-ASSEMBLY LH





(a) Disconnect the 3 (S24, B and C) connectors.

(b) Measure the resistance and voltage of the wire harness side connector.

Standard resistance:





Standard voltage:





(c) Reconnect the 3 connectors.

(d) Measure the voltage of the connectors.

Standard voltage:





(d) If the result is not as specified, replace the seat heater control.

2. INSPECT SEAT HEATER CONTROL SUB-ASSEMBLY RH





(a) Disconnect the 3 (S25, B and C) connectors.

(b) Measure the resistance and voltage of the wire harness side connector.

Standard resistance:





Standard voltage:





(c) Reconnect the 3 connectors.

(d) Measure the voltage of the connectors.

Standard voltage:





(d) If the result is not as specified, replace the seat heater control.