Removal

CONVERTIBLE: BACK WINDOW FRAME: REMOVAL

HINT
A bolt without a torque specification is shown in the standard bolt chart Specified Torque For Standard Bolts.

1. HALF OPEN ROOF PANEL





(a) Half open the roof panel Manual Open Operation.

2. REMOVE ROOF SIDE GARNISH INNER RH





(a) Using a clip remover, remove the clip labeled A.

(b) Using a screwdriver, detach the 7 clips.

HINT
Tape the screwdriver tip before use.

(c) Remove the side garnish.

3. REMOVE ROOF SIDE GARNISH INNER LH

HINT
Use the same procedures described for the RH side.

4. REMOVE REAR ROOF HEADLINING ASSEMBLY





(a) Using a screwdriver, detach the 7 clips.

HINT
Tape the screwdriver tip before use.

(b) Remove the roof headlining.

5. REMOVE BACK WINDOW FRAME SUB-ASSEMBLY UPPER





(a) Using a T40 "TORX" socket, remove the 8 screws.

(b) Remove the back window frame.

6. REMOVE REAR REMOVABLE ROOF WEATHERSTRIP





(a) Remove the 4 screws, 2 nuts and 4 clips.

(b) Using a clip remover, detach the clips.

(c) Remove the removable roof weatherstrip rear.

7. REMOVE ROOF SIDE RAIL WEATHERSTRIP RETAINER RH





(a) Remove the 4 screws and weatherstrip retainer.

8. REMOVE ROOF SIDE RAIL WEATHERSTRIP RETAINER LH

HINT
Use the same procedures described for the RH side.

9. REMOVE BACK WINDOW OUTSIDE MOULDING Removal

10. REMOVE BACK WINDOW GLASS Removal