Removal

EXTERIOR: FRONT BUMPER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE RADIATOR GRILLE

(a) Remove the 3 bolts and radiator grille.

3. REMOVE FRONT FENDER LINER LH





(a) Remove the 5 screws and partially remove the front fender liner.

HINT
It is not necessary to fully remove the fender liner. Partially remove it so that the bumper cover can be removed in a later step.

4. REMOVE FRONT FENDER LINER RH

HINT
Use the same procedures described for the LH side.

5. REMOVE FRONT BUMPER COVER

(a) Apply protective tape under the front fender.





(b) Remove the 6 screws and 4 clips.

(c) Detach the claws and remove the cover.

(d) Disconnect the 2 fog light connectors.

(e) Disconnect the 2 front side reflex reflector connectors.

(f) Disconnect the headlight cleaner hose.

6. REMOVE FRONT BUMPER SIDE RETAINER LH

(a) Remove the 2 screws.





(b) Using a screwdriver, detach the 2 claws and remove the side retainer.

HINT
Tape the screwdriver tip before use.

7. REMOVE FRONT BUMPER SIDE RETAINER RH

HINT
Use the same procedures described for the LH side.

8. REMOVE FRONT BUMPER ENERGY ABSORBER

9. REMOVE FRONT BUMPER REINFORCEMENT

(a) Remove the 6 bolts and reinforcement.

10. REMOVE FRONT BUMPER MOUNTING BRACKET

(a) Remove the 6 screws and mounting bracket.