Removal

AUDIO / VISUAL: MULTI-DISPLAY (w/ Navigation System): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE AIR CONDITIONING CONTROL ASSEMBLY Removal

3. REMOVE INSTRUMENT PANEL SAFETY PAD GARNISH SUB-ASSEMBLY Removal

4. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY Removal

5. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER





(a) Remove the 2 bolts and 2 screws.

(b) Disconnect the connector. Then remove the multi-display (with panel) and clip.

6. REMOVE MULTI-DISPLAY (CENTER DISPLAY)





(a) Remove the 4 screws on the both sides of the instrument panel finish upper panel.





(b) Remove the 6 screws and instrument panel finish panel No. 1 retainer.





(c) Remove the 5 screws and instrument panel finish panel No. 2 retainer.

(d) Remove the instrument cluster finish center lower panel.





(e) Remove the 2 screws.





(f) Remove the 2 screws and wiring harness clamp.

(g) Disconnect the 4 connectors, then remove the clamp.

(h) Remove the multi-display.