Security Lamp/Indicator: Testing and Inspection

THEFT DETERRENT: SECURITY INDICATOR LIGHT ASSEMBLY: INSPECTION

1. INSPECT OUTER MIRROR SWITCH ASSEMBLY (for Security Indicator)





(a) Apply battery voltage between the terminals of the indicator, and check the lighting condition of the security indicator.

NOTICE:
* If the positive (+) lead and the negative (-) lead are incorrectly connected, the security indicator does not illuminate.
* A voltage of more than 12 V will damage the security indicator.
* If the voltage is too low, the security indicator will not illuminate.

OK:





* If the result is not as specified, replace the switch assembly.