Installation

CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): INSTALLATION

1. INSTALL NO. 2 TELEPHONE BRACKET

(a) Set the aligning protrusions of the bracket, labeled A, into the holes of the DCM (telematics transceiver).





(b) Install the No. 2 telephone bracket with the screw labeled B.

2. INSTALL NO. 1 TELEPHONE BRACKET

(a) Set the aligning protrusions of the bracket, labeled A, into the holes of the DCM (telematics transceiver).





(b) Install the No. 1 telephone bracket with the 2 screws labeled B.

3. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET

(a) Connect the connector.





(b) Install the DCM (telematics transceiver) with the 3 bolts.

4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

5. INSTALL NO. 2 INSTRUMENT CLUSTER MOULDING Installation

6. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation

7. INSTALL INSTRUMENT PANEL LOWER Installation

8. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

9. INSTALL INSTRUMENT SIDE PANEL RH Installation

10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

11. INSTALL NO. 3 BOX PANEL Installation

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.

13. PRECAUTION FOR DCM (TELEMATICS TRANSCEIVER)

(a) When replacing the DCM (telematics transceiver), perform the vehicle contract setting DCM Activation.