Installation

LIGHTING: HEADLIGHT ASSEMBLY: INSTALLATION

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.
1. INSTALL HEADLIGHT ASSEMBLY LH

(a) Connect the connector.





(b) Install the headlight LH with the 3 bolts.

2. INSTALL FRONT BUMPER COVER

(a) Install the front bumper cover Installation.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.

4. VEHICLE PREPARATION FOR HEADLIGHT AIMING ADJUSTMENT Adjustments

5. PREPARATION FOR HEADLIGHT AIMING (Using a screen) Adjustments

6. HEADLIGHT AIMING INSPECTION Adjustments

7. HEADLIGHT AIMING ADJUSTMENT Adjustments

8. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT Fog Light Assembly

9. PREPARATION FOR FOG LIGHT AIMING Fog Light Assembly

10. FOG LIGHT AIMING INSPECTION Fog Light Assembly

11. FOG LIGHT AIMING ADJUSTMENT Fog Light Assembly