Clockspring Assembly / Spiral Cable: Testing and Inspection

SUPPLEMENTAL RESTRAINT SYSTEMS: SPIRAL CABLE: INSPECTION

1. INSPECT SPIRAL CABLE

(a) Visually check for defects with the spiral cable removed from the vehicle.

(1) The defects are as follows:

* Scratches on the spiral cable

* Small cracks the spiral cable

* Dents on the spiral cable

* Chips on the spiral cable

* Cracks or other damage to the connector

OK:

No defects are found.

HINT
If any of the defects is found, replace the spiral cable with a new one.

(b) Inspect the spiral cable.





Text in Illustration





(1) Measure the resistance according to the value(s) in the table below.

NOTICE:
To avoid breakage of the spiral cable, do not turn the spiral cable more than necessary.

Standard Resistance









(1) If the value is not within the specified range, replace the spiral cable.