Installation

PARK ASSIST / MONITORING: CLEARANCE WARNING BUZZER: INSTALLATION

1. INSTALL CLEARANCE WARNING BUZZER

(a) Engage the clamp and install the clearance warning buzzer.





(b) Connect the connector.

2. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY (W/ Navigation System) Installation

3. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (W/O Navigation System) Installation

4. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation

5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

6. INSTALL FRONT ASH RECEPTACLE ASSEMBLY Installation

7. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

8. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

9. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) Installation

10. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

11. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) Installation

13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) Installation

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (W/ Navigation System for HDD)

15. ADJUST CLOCK

16. INSPECT HARD DISK DRIVE (W/ Navigation System for HDD)

Operation Check