Installation

NAVIGATION / MULTI INFO DISPLAY: MULTI-DISPLAY: INSTALLATION

1. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY

2. INSTALL NAVIGATION ECU (W/ Navigation System for DVD) Installation

3. INSTALL CLOCK ASSEMBLY Installation

4. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY ASSEMBLY

(a) Install the display and navigation module display assembly as shown in the illustration.





5. INSTALL NO. 2 RADIO BRACKET Installation

6. INSTALL NO. 1 RADIO BRACKET Installation

7. REMOVE HARD DISK DRIVE (W/ Navigation System for HDD) Installation

8. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY Installation

9. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation

10. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

11. INSTALL FRONT ASH RECEPTACLE ASSEMBLY Installation

12. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) Installation

13. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

14. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

15. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) Installation

16. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

17. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

18. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) Installation

19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (W/ Navigation System for HDD)

20. ADJUST CLOCK

21. INSPECT HARD DISK DRIVE (W/ Navigation System for HDD)

Operation Check