Installation

NAVIGATION: MULTI-DISPLAY: INSTALLATION

1. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY

2. INSTALL CLOCK ASSEMBLY Installation

3. INSTALL NAVIGATION ECU (w/ Navigation System for DVD) Installation

4. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY ASSEMBLY

(a) Install the display and navigation module display assembly as shown in the illustration.





5. INSTALL NO. 2 RADIO BRACKET Installation

6. INSTALL NO. 1 RADIO BRACKET Installation

7. INSTALL HARD DISK DRIVE (w/ Navigation System for HDD) Installation

8. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY Installation

9. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation

10. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

11. INSTALL FRONT ASH RECEPTACLE SUB-ASSEMBLY Installation

12. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

13. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation

14. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) Installation

15. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

16. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation

17. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

18. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)

19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Navigation System for HDD)

20. ADJUST CLOCK

21. INSPECT HARD DISK DRIVE (w/ Navigation System for HDD)

Operation Check