Installation

PROPELLER SHAFT: FRONT PROPELLER SHAFT ASSEMBLY (for 4WD): INSTALLATION

1. INSTALL FRONT PROPELLER SHAFT ASSEMBLY

(a) Align the matchmarks on the transfer companion flange and the front propeller shaft.

(b) Temporarily tighten the front propeller shaft with the 6 bolts and 2 universal joint washers.





HINT
If reusing the bolts, apply engine oil to the bolts before use.

(c) Align the matchmarks on the differential companion flange and the front propeller shaft.

(d) Temporarily tighten the front propeller shaft with the 6 bolts and 2 universal joint washers.





HINT
If reusing the bolts, apply engine oil to the bolts before use.

(e) Using a screwdriver or equivalent, hold the transfer companion flange.





(f) Using a socket hexagon wrench 6 mm, fully tighten the front propeller shaft with the 6 bolts.

Torque : 25 Nm (255 kgf-cm, 18 ft-lbf)

NOTICE:
Be careful not to damage the front propeller shaft.

(g) Using a screwdriver or equivalent, hold the transfer companion flange.





(h) Using a socket hexagon wrench 6 mm, fully tighten the front propeller shaft with the 6 bolts.

Torque : 25 Nm (255 kgf-cm, 18 ft-lbf)

NOTICE:
Be careful not to damage the front propeller shaft.

2. INSTALL FRONT EXHAUST PIPE ASSEMBLY

Installation

3. CHECK FOR EXHAUST GAS LEAKS