Installation

A760E AUTOMATIC TRANSMISSION: TRANSMISSION WIRE: INSTALLATION

1. INSTALL TRANSMISSION WIRE

(a) Coat a new O-ring with ATF and install it to the transmission wire.





(b) Install the transmission wire with the bolt.





Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(c) Connect the transmission wire connector.

2. CONNECT TRANSMISSION WIRE

(a) Connect the 9 connectors to the solenoid valves.





(b) Install the 2 clamps with the 2 bolts.





Torque : 6.4 Nm (65 kgf-cm, 57 in-lbf for bolt A)

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf for bolt B)

(c) Coat the O-ring of the ATF temperature sensor with ATF.

(d) Connect the ATF temperature sensor and clamp with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY

(a) Coat a new O-ring with ATF and install it to the oil strainer.





(b) Install the oil strainer with the 4 bolts.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

(a) Install the 3 magnets in the oil pan.





(b) Install a new gasket and the oil pan to the transmission case with the 20 bolts.





Torque : 4.4 Nm (45 kgf-cm, 39 in-lbf)

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

6. ADD AUTOMATIC TRANSMISSION FLUID

(a) Add automatic transmission fluid A760E Automatic Transmission.

7. INSTALL NO. 2 ENGINE UNDER COVER

8. RESET MEMORY

(a) Perform the RESET MEMORY procedures (A/T initialization) A760E Automatic Transmission System.

9. PERFORM INITIALIZATION

(a) Perform initialization Repair Instruction - Initialization.

NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.