Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SPIRAL CABLE: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

3. REMOVE STEERING WHEEL NO.3 COVER LOWER Removal

4. REMOVE STEERING WHEEL NO.2 COVER LOWER Removal

5. REMOVE STEERING PAD Removal

6. REMOVE STEERING WHEEL ASSEMBLY

For 2GR-FSE Removal

For 1UR-FSE Removal

7. REMOVE STEERING COLUMN COVER

For 2GR-FSE Removal

For 1UR-FSE Removal

8. REMOVE SPIRAL CABLE with STEERING SENSOR

(a) Disconnect the connectors from the spiral cable with steering sensor.





NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Disengage the 3 claws and remove the spiral cable with steering sensor.

9. SEPARATE SPIRAL CABLE

(a) Disengage the 6 claws and separate the spiral cable.