Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY: INSTALLATION

1. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

(a) Connect the connector.





NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Install the front passenger side knee airbag assembly with the 3 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

3. INSTALL INSTRUMENT SIDE PANEL RH Installation

4. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation

5. INSTALL CONSOLE UPPER PANEL ASSEMBLY Installation

6. INSTALL FRONT CONSOLE UPPER PANEL GARNISH Installation

7. INSTALL FRONT DOOR OPENING TRIM COVER RH Installation

8. INSTALL FRONT DOOR SCUFF PLATE RH Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

10. PERFORM INITIALIZATION

11. INSPECT SRS WARNING LIGHT