Removal

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY: REMOVAL

1. DISCONNECT BATTERY NEGATIVE TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

Removal

HINT
Refer to the procedures up to "REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY".

3. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT Disassembly

4. REMOVE NO. 3 HEATER TO REGISTER DUCT Disassembly

5. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY

(a) Disconnect the 2 connectors and remove the instrument panel wire assembly from the front passenger airbag assembly.





NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Remove the 2 screws.





(c) Disengage the 5 hooks (A).





(d) Disengage the 5 hooks (B) and remove the front passenger airbag assembly from the instrument panel.