Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION

1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

(a) Engage the 5 hooks (A).





(b) Engage the 5 hooks (B) and install the front passenger airbag assembly on the instrument panel.

(c) Install the 2 screws.





(d) Connect the 2 connectors to the front passenger airbag assembly.





NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

2. INSTALL NO. 3 HEATER TO REGISTER DUCT Reassembly

3. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT Reassembly

4. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

Installation

HINT
Refer to the procedures from "INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY".

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

6. PERFORM INITIALIZATION

7. INSPECT SRS WARNING LIGHT