Removal

CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH Removal

4. REMOVE CONSOLE UPPER PANEL SUB-ASSEMBLY Removal

5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal

6. REMOVE FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and LH side Removal.

7. REMOVE FRONT DOOR OPENING TRIM COVER RH

HINT
Use the same procedure for the RH side and LH side Removal.

8. REMOVE INSTRUMENT SIDE PANEL RH Removal

9. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

10. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal

11. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY Removal

12. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BRACKET

(a) Disconnect each connector.

(b) Remove the 3 bolts and DCM (telematics transceiver) with bracket.





13. REMOVE NO. 1 TELEPHONE BRACKET

(a) Remove the screw and No. 1 telephone bracket.





14. REMOVE NO. 2 TELEPHONE BRACKET

(a) Remove the 2 screws and No. 2 telephone bracket.





15. REMOVE DCM (TELEMATICS TRANSCEIVER)