Removal

SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG ASSEMBLY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

2. REMOVE ROOF HEADLINING ASSEMBLY

Removal

HINT
Refer to the procedures up to "REMOVE ROOF HEADLINING ASSEMBLY".

3. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY

(a) Disconnect the connector.

NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Remove the 2 clips.

(c) Remove the 9 bolts and curtain shield airbag assembly.