Disposal

SUSPENSION: FRONT SHOCK ABSORBER WITH COIL SPRING: DISPOSAL

DISPOSAL





1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH
(a) Fully extend the shock absorber piston rod, and clamp it in a vise at an angle.
(b) Using a drill or similar tool, gradually make a hole in area A and discharge the gas inside of absorber.
CAUTION:
As metal debris may be blown outward by the gas, you must:
- Wear protective glasses.
- Cover the area being cut.
NOTE:
The gas is colorless, odorless and harmless.