Installation

SUPPLEMENTAL RESTRAINT SYSTEM: DRIVER SIDE KNEE AIRBAG ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY





(a) Connect the connector.
NOTE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Install the driver side knee airbag with the 4 bolts.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(c) Attach the 2 claws to install the lock lever.
(d) Connect the cable.
2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Installation
3. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation
4. INSTALL DOOR SCUFF PLATE ASSEMBLY LH Installation
5. INSTALL CONNECT BATTERY NEGATIVE TERMINAL
6. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

7. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.