Removal

LIGHTING: REAR SIDE MARKER LIGHT ASSEMBLY: REMOVAL

REMOVAL
HINT:
- Use the same procedures for the RH and LH side.
- The procedures listed below are for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE REAR BUMPER COVER
(a) Remove the rear bumper cover Removal.





3. REMOVE REAR SIDE MARKER LIGHT LENS LH
(a) Remove the screw and lens.