Removal

LIGHTING: LICENSE PLATE LIGHT ASSEMBLY: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE REAR FLOOR FINISH PLATE Disassembly
3. REMOVE SPARE WHEEL COVER ASSEMBLY
4. REMOVE SPARE TIRE
5. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
6. REMOVE LUGGAGE COMPARTMENT TRIM COVER RH Disassembly
7. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH Disassembly
8. REMOVE TOOL BOX COVER Disassembly
9. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY Disassembly
10. REMOVE LUGGAGE COMPARTMENT TRIM REAR COVER SUB-ASSEMBLY Disassembly
11. REMOVE TONNEAU COVER STOPPER SUB-ASSEMBLY RH Disassembly
12. REMOVE TONNEAU COVER STOPPER SUB-ASSEMBLY LH Disassembly
13. REMOVE TONNEAU COVER ASSEMBLY Disassembly
14. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY Disassembly
15. REMOVE LUGGAGE COMPARTMENT TRIM COVER INNER LOWER Disassembly
16. REMOVE REAR FLOOR FINISH SIDE PLATE RH Disassembly
17. REMOVE REAR FLOOR FINISH SIDE PLATE LH Disassembly
18. REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT Disassembly
19. REMOVE LUGGAGE COMPARTMENT TRIM COVER SIDE RH Disassembly
20. REMOVE LUGGAGE COMPARTMENT TRIM COVER SIDE LH Disassembly
21. REMOVE REAR BUMPER COVER Removal





22. REMOVE LICENSE PLATE LIGHT ASSEMBLY
(a) Detach the claw and remove the license plate light.