Installation

METER: COMBINATION METER: INSTALLATION

INSTALLATION





1. INSTALL COMBINATION METER ASSEMBLY
2. INSTALL TURN SIGNAL SWITCH ASSEMBLY
3. INSTALL STEERING COLUMN COVER UPPER
4. INSTALL STEERING COLUMN COVER LOWER Installation





5. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
(a) Connect the connector.
(b) Attach the 4 clips to install the panel.
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

8. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.