Removal

AIR CONDITIONING: BLOWER UNIT: REMOVAL

REMOVAL

1. SET RADIO RECEIVER ASSEMBLY TO SHIPMENT MODE
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

3. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
(a) Remove the instrument panel safety pad Removal.
4. REMOVE NO. 2 AIR DUCT





(a) Remove the 2 screws and air duct.
5. REMOVE BLOWER ASSEMBLY
(a) Disconnect the connector and clamp from the blower.





(b) Using a screwdriver, detach the claw and disconnect the connector.
(c) Remove the 3 screws, bolt and nut.
(d) Detach the claw and remove the blower.