Reassembly

INTERIOR: ROOF HEADLINING: REASSEMBLY

REASSEMBLY





1. INSTALL ROOF HEADLINING ASSEMBLY REAR
(a) Attach the 7 clips to install the headlining.





2. INSTALL ROOF SIDE GARNISH INNER LH
(a) Attach the 7 clips and claw to install the garnish.
(b) Install the clip labeled A.
3. INSTALL ROOF SIDE GARNISH INNER RH
HINT: Use the same procedures described for the LH side.





4. INSTALL ROOF HEADLINING ASSEMBLY CENTER
(a) Attach the 3 clips labeled A to install the headlining.
(b) Install the 5 clips.





5. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY LH
(a) Attach the 4 clips and 3 claws to install the garnish.
6. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY RH
HINT: Use the same procedures described for the LH side.

7. INSTALL ROOF HEADLINING ASSEMBLY





(a) Push the headlining as indicated by the arrow in the illustration to attach the 4 claws. Then install the headlining.





(b) Install the 2 clips.





8. INSTALL ROOF FRONT CORNER HEADLINING LH
(a) Attach the 2 clips to install the headlining.
9. INSTALL ROOF FRONT CORNER HEADLINING RH
HINT: Use the same procedures described for the LH side.





10. INSTALL MAP LIGHT ASSEMBLY
(a) Connect the map light connector.
(b) Install the map light with the 2 screws.
(c) Install the 2 lenses.
11. INSTALL VISOR HOLDER
(a) Install the 2 holders by turning them clockwise.
12. INSTALL VISOR ASSEMBLY LH
(a) Install the visor with the 2 screws.
13. INSTALL VISOR ASSEMBLY RH
(a) Install the visor with the 2 screws.
14. INSTALL VISOR BRACKET COVER LH
(a) Attach the 3 claws to install the bracket cover.
15. INSTALL VISOR BRACKET COVER RH
HINT: Use the same procedures described for the LH side.





16. INSTALL FRONT PILLAR GARNISH LH
(a) Attach the 2 clips to install the garnish.
17. INSTALL FRONT PILLAR GARNISH RH
HINT: Use the same procedures described for the LH side.





18. INSTALL FRONT DOOR OPENING TRIM COVER LH
(a) Attach the 3 claws to install the trim cover.
19. INSTALL FRONT DOOR OPENING TRIM COVER RH
HINT: Use the same procedures described for the LH side.





20. INSTALL DOOR SCUFF PLATE ASSEMBLY LH
(a) Attach the 6 claws and 5 clips to install the scuff plate.
21. INSTALL DOOR SCUFF PLATE ASSEMBLY RH
HINT: Use the same procedures described for the LH side.

22. CLOSE ROOF PANEL
(a) Close the roof panel Manual Close Operation.