Map Disc cannot be Inserted

NAVIGATION: NAVIGATION SYSTEM: Map Disc cannot be Inserted

Map Disc cannot be Inserted

INSPECTION PROCEDURE

PROCEDURE

1. CHECK MAP DISC




(a) Check that the map disc is not deformed or cracked.
OK:
No deformations or cracks on map disc.
NG -- REPLACE MAP DISC
OK -- Continue to next step.
2. CHECK NAVIGATION ECU
(a) Check that the "PUSH" indicator near the disc slot turns on.
OK:
Indicator turns on.
NG -- PRESS EJECT SWITCH TO EJECT DISC
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE