Display Panel does not Open, Tilt or Tilts Improperly

NAVIGATION: NAVIGATION SYSTEM: Display Panel does not Open, Tilt or Tilts Improperly

Display Panel does not Open, Tilt or Tilts Improperly

INSPECTION PROCEDURE

PROCEDURE

1. CHECK MULTI-DISPLAY SWITCH
(a) Check switch operation.
(1) Using your hand, open and close the multi-display door. Check that the open and close mechanism is free from foreign matter.
(2) Press the multi-display door's OPEN / CLOSE switch several times. Check that the switch operation is normal.
(3) Turn the ignition switch from OFF to ON, and check that the multi-display door's OPEN / CLOSE switch operation is normal.
(4) Using your hand, close the multi-display door. Then check that the multi-display door's OPEN / CLOSE switch operation is normal.
OK:
Function returns to normal.
NG -- NORMAL
OK -- Continue to next step.
2. CHECK OPERATION OF MULTI-DISPLAY SWITCH
(a) After replacing the multi-display junction block with a normal one, check that the panel switch operates normally.
OK:
Panel switch operation returns to normal.
NG -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN DIAGNOSTIC TROUBLE CODE CHART
OK -- END