Removal

POWER STEERING: DC / DC CONVERTER: REMOVAL

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
(a) Disconnect the negative (-) battery cable from the battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE BATTERY
(a) Disconnect the positive (+) battery cable from the battery terminal.
(b) Remove the 2 nuts and battery clamp.
(c) Remove the battery insulator.
(d) Remove the battery.
4. REMOVE BATTERY TRAY
(a) Remove the 3 bolts and battery tray.
5. REMOVE DC-DC CONVERTER





(a) Release the locks of the 2 converter assembly connectors A and B, and disconnect the connectors.





(b) Remove the 3 bolts and converter.