Removal

SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: REMOVAL

REMOVAL
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY Removal
2. REMOVE FRONT SEAT ASSEMBLY Removal
3. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

5. REMOVE FRONT SEAT INNER BELT ASSEMBLY

(a) for Driver Seat:
Disconnect the 3 connectors and detach the 5 clamps.
(b) for Passenger Seat:
Disconnect the 2 connectors and detach the clamp.