Installation

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH





(a) Attach the rear combination light guide, rear bumper retainer attachment and 2 claws.
(b) Install the rear combination light LH with the 3 nuts.
(c) Connect the connector.
2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH Installation
3. INSTALL REAR FLOOR FINISH PLATE Installation
4. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER Installation
5. INSTALL NO. 2 COURTESY LIGHT ASSEMBLY Installation
6. INSTALL DECK TRIM SIDE BOARD RH Installation
7. INSTALL DECK TRIM SIDE BOARD LH Installation
8. INSTALL ROPE HOOK ASSEMBLY Installation
9. INSTALL ROPE HOOK Installation
10. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation
11. INSTALL REAR LIGHT ASSEMBLY LH





(a) Install the rear light LH with the 4 nuts.
(b) Connect the connector.
12. INSTALL BACK DOOR TRIM COVER Installation
13. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY Installation
14. INSTALL SWITCH BEZEL (W/ Power Trunk Lid System) Installation
15. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP Installation
16. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH Installation
17. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH Installation
18. INSTALL LUGGAGE COMPARTMENT DOOR COVER RH Installation
19. INSTALL LUGGAGE COMPARTMENT DOOR COVER LH Installation