Removal

LIGHTING: MAP LIGHT ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE MAP LIGHT ASSEMBLY





(a) Using a screwdriver, detach the 2 claws and 2 covers.
HINT: Tape the screwdriver tip before use.





(b) Remove the 2 screws.





(c) Using a moulding remover, detach the 2 clips.
(d) Disconnect the connectors and remove the map light.