Reassembly

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD: REASSEMBLY

REASSEMBLY
HINT: A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR





(a) Attach the 2 claws to install the sensor.
2. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH





(a) Attach the 6 claws to install the garnish.
3. INSTALL NO. 2 DEFROSTER NOZZLE GARNISH





(a) Attach the 6 claws to install the garnish.
4. INSTALL NO. 1 METER HOOD RETAINER





(a) Attach the 2 screws to install the 2 retainers.
5. INSTALL NO. 2 INSTRUMENT PANEL WIRE





(a) Attach the 4 clamps to install the wire.
(b) Connect the connector.
6. INSTALL NAVIGATION ANTENNA ASSEMBLY (for DVD) Installation
7. INSTALL NAVIGATION ANTENNA ASSEMBLY (for HDD) Installation
8. INSTALL TIRE PRESSURE WARNING ECU





(a) Install the ECU with the bolt.
9. INSTALL NO. 2 HEATER TO REGISTER DUCT





(a) Install the duct with the 2 screws.
10. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY Installation
11. INSTALL NO. 3 HEATER TO REGISTER DUCT





(a) Install the duct with the 3 screws.
12. INSTALL NO. 1 HEATER TO REGISTER DUCT





(a) Install the duct with the 3 screws.
13. INSTALL NO. 1 INSTRUMENT PANEL PIN





(a) Install the 2 pins with the 2 screws.
14. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT





(a) Attach the claw and install the duct.
(b) Install the screw.
15. INSTALL DEFROSTER NOZZLE ASSEMBLY





(a) Install the nozzle with the 3 screws.
16. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT





(a) Attach the claw and install the duct.
(b) Install the screw.
17. INSTALL ENGINE SWITCH





(a) Attach the 2 claws to install the switch.