Removal

1UR-FSE ENGINE MECHANICAL: FRONT ENGINE MOUNTING (for AWD): REMOVAL

REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE ENGINE AND TRANSMISSION
(a) Remove the engine and transmission Removal.
4. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE Removal
5. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR Removal
6. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR Removal
7. REMOVE FRONT FRAME ASSEMBLY Removal
8. REMOVE FRONT ENGINE MOUNTING INSULATOR





(a) Remove the 2 nuts, 2 spacers and 2 insulators.