Removal

MIRROR: INNER REAR VIEW MIRROR: REMOVAL

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTICE:
- After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

3. REMOVE MAP LIGHT ASSEMBLY Removal





4. REMOVE INNER REAR VIEW MIRROR COVER (W/O Rain Sensor)
(a) Detach the 2 claws and remove the inner rear view mirror cover as shown in the illustration.





5. REMOVE RAIN SENSOR COVER (W/ Rain Sensor)
(a) Pull the stopper in the direction shown in the illustration.
(b) Detach the 2 claws and remove the rain sensor cover.
6. REMOVE INNER REAR VIEW MIRROR ASSEMBLY
(a) Disconnect the connector.





(b) Using a T20 "TORX" socket wrench, remove the screw and inner rear view mirror.